Phone Orders
1-800-424-8222
Our Shopping Cart is:
F9810 (MX-10130) Image Intensifier Tube - Select Series
(U.S. Customers only)
Image Intensifier, Generation 3 18mm F9810SLN and F9810SLG (MX-10130) - U.S. Customers Only
ITT Night Vision, the world's leading producer of Generation (Gen 3) image intensification devices, offers the highest performance image intensifier tubes available.
ITT's Gen 3 F9810SLN and F9810SLG (MX-10130) image intensifier tubes are designed for use in all night vision systems that use an non-inverting tube, such as AN/PVS-7A, B, C & D series night vision goggles and select weaponsights.
ITT's MX-10130 Gen 3 18-mm image intensifier is completely self-contained with an integral high-voltage power supply. Equipped with automaticbrightness control (ABC), this power supply provides constant output image brightness as light levels increase. It also provides bright-source protection to guard the tube against exposure to high levels of light.
Description
ITT's Gen 3 F9810SLN and F9810SLG (MX-10130) image intensifier tubes consists of a high-efficiency GaAs photocathode bonded to a glass input window, a microchannel plate (MCP) current amplifier, and a P-43 phosphor screen deposited on an non-inverting fiber-optic output window. The Gen 3 photocathode is very sensitive to low-radiation levels of visible and, especially, near infrared light. It also provides very high signal-to-noise ratio (SNR) for extended detection ranges at very low light levels. The 6-micron channel spacing in ITT’s MCP provides exceptional resolution. The MCP has a thin ion-barrier film that preserves photocathode sensitivity during operation, thereby greatly extending the life of Gen 3 tubes compared to Gen 2.
ITT continues to improve Gen 3 MX-10130 image intensifier tubes to increase operational range and situational awareness for the user. Equipped with a auto-gated power supply, the Pinnacle™ versions provide truly outstanding performances in high-light or light-polluted areas, such as urban environments. In addition, the Pinnacle™ tube provides a much reduced halo.
 F9810 (MX-10130) Image Intensifier Tube - Select Series - Spec Sheet - PDF (File Size: 197k) |
| Tube Performance Levels | Pinnacle™ | |
| Tube Model | F9810SLN | F9810SLG |
| Tube Part# | ITTT-277013-1 | ITTT-277014-1 |
| Gate Type | Non-Gated | Auto-Gated |
| Film Type | Thin or Std | Thin-Filmed |
| Resolution lp/mm | 57 (Min), 64 (Typ) | 57 (Min), 64 (Typ) |
| Photocathode Sensitivity | 1350 (Min) | 1350 (Min) |
| Signal/Noise Ratio | 16.2 (Min), 21 (Typ) | 16.2 (Min), 21 (Typ) |
| EBI | 2.5 x 10E-11 Phot (Max) | 2.5 x 10E-11 Phot (Max) |
| Maximum Spots in each zone | Zone | Zone |
| Spot Size (in.) | 1 2 3 | 1 2 3 |
| >.015 or Larger | 0 0 0 | 0 0 0 |
| >.012 – .015 | 0 0 0 | 0 0 0 |
| >.009 – .012 | 0 1 1 | 0 1 1 |
| >.006 – .009 | 0 2 2 | 0 2 2 |
| >.003 – .006 | 0 2 3 | 0 2 3 |