Phone Orders
1-800-424-8222

|
F9815 (MX-11769) Image Intensifier Tube - Select Series
(U.S. Customers only)
Image Intensifier, Generation 3 18mm F9815SLN and F9815SLG (MX-11769) - U.S. Customers Only
ITT Night Vision, the world's leading producer of Generation (Gen 3) image intensification devices, offers the highest performance image intensifier tubes available.
ITT's Gen 3 F9815SLN and F9815SLG (MX-11769) image intensifier tubes are designed for use in the AN/PVS-14 Monocular Night Vision Device.
ITT's MX-11769 Gen 3 18-mm image intensifier is completely self-contained with an integral high-voltage power supply. Equipped with automaticbrightness control (ABC), this power supply provides constant output image brightness as light levels increase. It also provides bright-source protection to guard the tube against exposure to high levels of light.
Description
ITT's Gen 3 F9815SLN and F9810SLG (MX-11769) image intensifier tubes consists of a high-efficiency GaAs photocathode bonded to a glass input window, a microchannel plate (MCP) current amplifier, and a P-43 phosphor screen deposited on an inverting fiber-optic output window.
The Gen 3 photocathode is very sensitive to low-radiation levels of visible and, especially, near infrared light. It also provides very high signal-to-noise ratio (SNR) for extended detection ranges at very low light levels as well as variable gain to optimize performance in the AN/PVS-14. The 6-micron channel spacing in ITT’s MCP provides exceptional resolution. The MCP has a thin ion-barrier film that preserves photocathode sensitivity during operation, thereby greatly extending the life of Gen 3 tubes compared to Gen 2.
ITT continues to improve Gen 3 MX-11769 image intensifier tubes to increase operational range and situational awareness for the user. Equipped with an auto-gated power supply, the Pinnacle™ versions provide truly outstanding performances in high-light or light-polluted areas, such as urban environments. In addition, the Pinnacle™ tube provides a much reduced halo.
| Tube Performance Levels |
|
Pinnacle™ |
| Tube Model |
F9815SLN |
F9815SLG |
| TUbe Part # |
ITTT-277015-1 |
ITTT-277016-1 |
| Gate Type |
Non-Gated |
Auto-Gated |
| Film Type |
Thin or Std |
Thin-Filmed |
| Resolution lp/mm |
57 (Min), 64 (Typ) |
57 (Min), 64 (Typ) |
| Photocathode Sensitivity |
1350 (Min) |
1350 (Min) |
| Signal/Noise Ratio |
16.2 (Min), 21 (Typ) |
16.2 (Min), 21 (Typ) |
| EBI |
2.5 x 10E-11 Phot (Max) |
2.5 x 10E-11 Phot (Max) |
| Maximum Spots in each zone |
Zone |
Zone |
| Spot Size (in.) |
1 2 3 |
1 2 3 |
| >.015 or Larger |
0 0 0 |
0 0 0 |
| >.012 – .015 |
0 0 0 |
0 0 0 |
| >.009 – .012 |
0 1 1 |
0 1 1 |
| >.006 – .009 |
0 2 2 |
0 2 2 |
| >.003 – .006 |
0 2 3 |
0 2 3 |
|