| TECHNICAL SPECIFICATIONS: |
| |
|
| OPTICAL DATA |
|
| |
|
| System |
Passive Red Dot Collimator Reflex Sight |
| Magnification |
1X |
| Eye Relief |
Unlimited |
| Reticle Size |
2 and 4 MOA * |
| Optical Coating |
Anti reflex, 1st, 2nd and 3rd Generation NVD compatible (M2 only) |
| |
|
| ELECTRONIC DATA |
|
| |
|
| Battery Type |
One 3 Volt Lithium battery type 2L76 or DL1/3N |
| Battery Life, typical** |
50,000 hours at setting 7 out of 10 |
| Switch, dot brightness |
10 settings – 4 NVD, 6 Daylight of which 1Extra Bright |
| |
|
| MECHANICAL DATA |
|
| |
|
| Material Housing |
Extruded, high strength aluminum, hard anodized, black, non-glare finishSight body and mount protected by a rubber cover, mat black |
| Surface Finish |
Hard anodized, matte, Dark Graphite Gray |
| Material Lens Covers |
Thermoplastic elastomer, black, non-glare finish |
| Adjustment |
1 click = 10 mm at 80 meters = 13 mm at 100 meters = ½" at 100 yds |
| Mounting |
1 ring, 30 mm or Aimpoint QR |
| |
|
| DIMENSIONS |
|
| |
|
| Length |
130 mm (5.1” ) |
| Width/Height |
55 mm x 55 mm (2.2” x 2.2 ”) |
| Ring Width |
Max 30 mm (1.2") |
| Weight |
220 grams (7.8 oz) incl. lens covers. Rubber cover 50 grams (1.7 oz) |
| |
|
| ENVIRONMENTAL DATA |
|
| |
|
| Temperature Range |
-45 o C to +71o C (-50 o F to +160 o F) |
| Water resistance |
45 meters (135 ft) |
| *MOA (Minute Of Angle) |
1 MOA = 30 mm at 100 meters = 1" at 100 yards |
| |
**NEW ACET technology |
| |
|
AIMPOINT COMP M3 - When police and armed forces personnel are on duty, they need their equipment to handle just about any situation, anytime, anywhere. That’s why Aimpoint created the CompM3, a revolutionary sight that offers the highest standard available for sight systems technology. Incorporating over 30 years of Aimpoint’s internationally recognized design innovations; the CompM3 features our latest technology and is even more rugged than Aimpoint’s other sights. Featuring our revolutionary Advanced Circuit Efficiency Technology (ACET) that gives the sight unparalleled battery life and ease of use, the CompM3 works with any generation of night vision device (NVD). Built primarily for armed forces and police use to hold up under the roughest physical handling and most severe weather conditions, the CompM3 is also ideal for hunters and sport shooters. The CompM3 comes with a replaceable, outer black rubber cover, which protects it from scratching and adds an additional stealth factor. The outer cover is also available in Dark Earth Brown – perfect camo for use in the desert and in the jungle. 
